Redação
Atualizações recentes da Borra sobre entrega de produtos, aplicações técnicas e histórias de projetos do lado do mercado.
An irrigation booster pump installation should not start until source flow, largest-zone duty, suction conditions, and control logic are verified on paper and in the field. Landscape and farm sprinkler systems often need added pressure at the worst sprinkler or zone, not at the pump label maximum. This checklist helps contractors and project buyers confirm […]
How far a transfer pump can move water is governed by required flow, total head from elevation and friction, suction condition, liquid properties, and the manufacturer’s verified curve for the offered model – not by a marketing slogan that quotes a single meter or foot number. Route planning replaces distance folklore with measurable inputs. This […]
Review an electric fire pump diagram by walking the fire-flow water path from source to discharge header, then isolating the electric driver and controller interfaces, sensing line, and pressure-maintenance branch as separate review lanes. Contractors and buyers use the sketch to assign trade handover points and missing notes. It is not a wiring instruction, lockout […]
A manual water transfer pump belongs in short, attended moves where power is unavailable or undesirable and the required volume is modest — and the decision still starts from distance, elevation change, liquid character, and how long a person can sustain the work. Sites that skip those inputs often discover mid-shift that the hand route […]
A self-priming pump diagram earns its keep when the priming path is visible: retained casing liquid, suction-line geometry, air-handling behavior within manufacturer limits, and a discharge connection that can be isolated for service — then verified against the installed model. Layout reviewers who start at the impeller cutaway alone often miss the suction details that […]
Reading a diesel fire pump diagram starts at the water source and suction arrangement, then walks the fire-flow path, pressure-maintenance branch, diesel fuel interfaces, and controller notes — without treating a supplier sketch as approval or a wiring instruction. Project teams use that order to catch missing fuel or sensing notes before procurement locks scope. […]
Project teams use “booster pump station” for the assembly that raises water pressure for a measured demand profile — pumps, controls, isolation, sensing, and documented trade interfaces — rather than a single catalog pump name. Facility teams and contractors need that vocabulary before comparing skid packages or field-built rooms. This guide clarifies station scope for […]
A pressure tank can support a booster system in more than one way, depending on the design. Before discussing size, identify the role assigned in the approved system: pressure stabilization, control support, transient response, or another documented function. Contents Direct Answer Part 1. Define the Tank's Role in the System Part 2. Collect Demand and […]