ห้องข่าว
อัปเดตล่าสุดจาก Borra ครอบคลุมการส่งมอบผลิตภัณฑ์ การประยุกต์ใช้ทางเทคนิค และเรื่องราวโครงการในฝั่งตลาด.
Dewatering is the controlled removal of unwanted water, from an excavation, a flooded area, a pit, or a structure, so that work can proceed or an asset stays protected. The pump is only the middle of that task. Contents Direct Answer 1. The Dewatering Duty in Project Terms 2. Main Components and Their Roles 3. […]
Cavitation is often used as a quick explanation for noise, changed delivery, or vibration, but those symptoms do not prove one cause. For a self-priming installation, the responsible first action is to preserve evidence and review the suction side as a system. Contents Direct Answer 1. Define the Observation Before Naming the Cause 2. Review […]
Maintenance content and intervals belong to the manufacturer manual for the installed model and to the site's duty: a pump moving clean water on a mild schedule and a pump handling dirty water around the clock do not share a maintenance calendar. The… Contents Direct Answer 1. Start From the Manual and the Duty 2. […]
Site teams often receive a self-priming pump after the civil, piping, electrical, and package scopes have been separated. That separation is useful only when each handover point is visible on the current drawings. Contents Direct Answer 1. Confirm the Installation Basis Before Unloading 2. Review the Base, Position, and Service Access 3. Treat the Suction […]
Suction lift describes the situation where the liquid surface sits below the pump, so the pump must draw liquid upward through the suction line before it can deliver anything. A self-priming pump is built to re-establish that condition within stated limits… Contents Direct Answer 1. What Suction Lift Means 2. Why the Usable Limit Is […]
Self priming pump troubleshooting begins with a clear limit: a review article cannot replace the manufacturer manual, site safety process, or authorized service procedure. Before touching equipment, identify the model, current installation documents, liquid…
A self-priming pump is a surface-installed machine that stands above the liquid and re-establishes its own prime within the limits stated by its manufacturer. A submersible pump is installed in the liquid it moves, with a sealed motor, and is lifted out when… Contents Direct Answer 1. Two Installation Concepts, Two Service Models 2. Compare […]
A jockey pump pressure switch review starts with the role of the pressure-maintenance branch in the approved system. The review separates that branch from the main fire-pump duty and from unrelated building controls. Contents Direct Answer 1. Define the Pressure-Maintenance Boundary 2. Locate the Sensing Path in Documents 3. Separate Control Boundaries 4. Review Access […]