How to Size a Submersible Sewage Pump for a Lift Station
Size a submersible sewage pump from wastewater flow, total dynamic head, solids, the pump curve and wet-well cycling, with a practical selection checklist.
Newsroom
Pump
Recent updates from Borra covering product delivery, technical applications and market-side project stories.
Booster Pump Set Duty and Standby Configuration Explained
Understand duty, assist and standby booster pump roles, verify full-duty redundancy on pump curves and define the failure-case control sequence.
Booster Pump Pressure Sensor Placement and Setup
Choose booster pump pressure sensor locations for discharge control, remote demand and suction protection, then verify setpoints and failure response.
Booster Pump Selection for Hospitals and Healthcare Buildings
A hospital booster pump system must deliver the required domestic-water flow and pressure under defined normal and failure conditions, while supporting the facility's water-management and maintenance plans. Start by separating patient-care, sanitary, food-service, laundry, laboratory, and equipment loads into the actual pressure zones they use. Calculate probable demand under the applicable plumbing rules, then identify any critical loads and their required continuity. Select pumps from documented duty points and test the controls, source water, and standby behavior. A generic “hospital pump size”...
How to Select a Booster Pump Set for a Hotel
Select a hotel booster pump set using real fixture demand, pressure zones, peak operating patterns and failure-case requirements, not room count alone.
Booster Pump Head Calculation for Multi-Story Buildings
Calculate booster pump head from elevation, fixture pressure, pipe losses and available inlet pressure. See a transparent multi-story building example.
How to Calculate Booster Pump Flow for an Apartment Building
Calculate apartment booster pump flow from probable fixture demand, special loads and pressure zones. See a worked example and the supplier data to verify.
Horizontal Split Case vs Vertical Turbine Fire Pump: When to Use Each
Choose between a horizontal split case and a vertical turbine fire pump mainly from water-source geometry, suction conditions, required duty, site layout.