How to Size a Deep Well Pump for Irrigation
Size an irrigation deep-well pump from zone demand, tested well yield, pumping water level, total head and the selected model performance curve.
Redação
Atualizações recentes da Borra sobre entrega de produtos, aplicações técnicas e histórias de projetos do lado do mercado.
Size an irrigation deep-well pump from zone demand, tested well yield, pumping water level, total head and the selected model performance curve.
A single-stage centrifugal pump uses one hydraulic stage, while a multistage pump uses successive stages to add head through the assembly. The appropriate choice depends on the required flow, head, liquid, installation and operating range. More stages do not automatically mean more flow, higher efficiency or better suitability. Select the duty from verified performance data, then compare mechanical and service requirements. This guide addresses clean-water transfer and boosting without assigning undocumented pressure, stage counts or operating limits to a Borra product. Separate...
Compare close-coupled and frame-mounted pumps by shaft arrangement, alignment, service access, replacement parts and the same hydraulic duty.
Compare NPSH available and required using suction pressure, level, temperature and losses, and verify the documented margin for the actual duty.
Find pump duty point from pump and system curves. Follow an illustrative calculation, compare operating cases and verify installed flow and head.
Read centrifugal pump head, flow, efficiency, power and NPSH curves, confirm their test conditions and check the installed system operating point.
Especificar a alternância da bomba de esgoto duplex, a demanda de pico e de queda, a resposta a falhas, os alarmes e a função hidráulica paralela com uma matriz de testes de comissionamento.
Set sewage pump floats from wet-well volume, pump limits and alarm reserve. Check placement, free movement and rising and falling level behavior.